The Zircon I320 is a multiscanner. You can use it to find studs, joists, and metal pipes located behind walls, ceilings, or floors. Keep reading to learn about some of the features that it offers.
One of the main functions of the Zircon I320 is the stud scan mode. This mode will help you find the center and edges of metal or wood studs. The tool can locate these studs up to 3/4-inch deep. If you need more power, then you can switch to the DeepScan mode. This will enable you to locate studs up to 1.5 inches deep.
You might be interested to read about:
You can also use the Zircon I320 multiscanner to detect metal. The tool can detect copper and other non-ferrous metals up to 1.5 inches deep. Ferrous metals like rebar can be found up to three inches deep.
It's always important for you to be aware of the location of live wires when doing your work. The Zircon I320 offers a WireWarning detection feature. This will show you the location of live, unshielded electrical wire. It can locate this wire up to two inches deep. You will be notified of the presence of live wire when using the tool in both stud or metal scanning modes.
When you find your intended target, you'll definitely want to know. The Zircon I320 multiscanner indicates this to you in three different ways. The display screen and light pointing system both show you the location. An audible tone will also alert you that a target has been found.
You will also want to know how deep your targets are too. The Zircon I320 is equipped with a signal strength indicator. This will let you know whether the target is deep or shallow.
If you need to find studs, joists, or metal pipes, then the Zircon I320 is the tool for you. It can detect studs up to 1.5 inches deep in its most powerful mode. You can also use the Zircon I320 to locate non-ferrous up to 1.5 inches deep and ferrous metals up to three inches deep.
Bestselling Zircon I320 Multiscanner Products in 2020
Zircon MultiScanner i320 OneStep Center-Finding Stud Finder with Metal Scanning and DVD How-To Guide
- Two stud scan modes to find wood or metal studs or joists up to 1- 1/2-Inch (38 mm) deep
- Metal scan mode to locate metal pipes or rebar
- WireWarning detection indicates the presence of live, unshielded electrical wire up to 2-Inches (51 mm) deep
- ACT Auto Correcting Technology corrects common user errors automatically
- Includes Zircon instructional DVD